Wisefab Mitsubishi Evo 7/8/9 Rear Suspension Kit + Spares

(No reviews yet) Write a Review
Evo 7/8/9
Wisefab Mitsubishi Evo 7/8/9 Rear Suspension Kit + Spares

Mitsubishi EVO is good performance car designed for rally. Because it’s good performance it is more and more used for circuit racing. Lowering the car would give more grip and better handling, but then the factory designed kinematics wouldn’t work as it supposed to. Wisefab suspension kit will bring the roll center, bumpsteer, anti-squat and camber curve back to normal range, providing better roll stiffness, better handling and grip.

  • Minus 15 kg of total front and rear weight over original components
    Maintaining required strength and stiffness
  • 7075-T6 aluminum billet CNC knuckles
    With optimized design and all double shear connections provide low weight and high strength
  • All the rear links and arms are made of high strength steel
    CrMo rod ends and sphericals used instead of rubber bushings
  • Camber and bumpsteer adjustments
    Rear Camber adjustment is built into the upright and it is very easy to use at the trackside
    Also possibility to adjust bumpsteer at the upright
  • The standard 17“ or bigger wheel can be used
    If standard wheels are used, then there are no modifications needed for bodywork. If the wheels are wider to outside, then some bodywork should be done to have enough wheel clearance for bump travel
  • Brakes can be used from EVO 7, 8, 9, or 10
    There are 2 caliper attachment possibilities for rear
  • EVO CV joints are known to be very good to handle big power
    but for any case if power and grip exceed their limits, then uprights have room for bigger CV joint if needed
  • Adjustable antiroll bar (sway bar) motion ratio
    There are 3 possibilities for antiroll bar drop link attachments
    Changing antiroll bar motion ratio is quick and easy way to tune your car understeer/oversteer

Kit includes:

  • Pre-set suspension links
  • Knuckles with hardware
  • Installation guide

 Other components, packaging and clearance

  • This kit assumes coilovers
  • Minimum rim size is 17“
  • Original wheel speed sensor can be used