Subaru Impreza is good performance car designed for rally. Because of its good performance it’s more and more used for grip racing as well. Lowering the car will give more grip and better handling, but then the factory designed kinematics won’t work as they are supposed to. Wisefab Subaru Impreza knuckles / uprights bring the roll center, bumpsteer and camber curve back to normal range, provide better roll stiffness, handling and grip.
- This drop knuckle kit can be fitted to following models:
Impreza (GM, GC, GF, 1992–2001) (GD, GG, 2000–2007) (GE, GV, GH, GR 2007–2014) (GJ, GP, 2011–2016) (VA, 2014-2020) Forester (SF, 1997–2002) (SG, 2002–2007)
- -2 kg lighter over OEM knuckle / upright
But still maintaining required strength and stiffness
- Quicker steering ratio
Steering ratio is slightly quicker compared to OEM
- Roll center correction
-50mm drop from the knuckle / upright
- Mounting points for 5x100 or 5x114,3 wheel bearings
Either 2005 - STI 5x114,3 bolted wheel bearing (28373VA000) or 2007 - 2013 WRX 5x100 bolted wheel bearing (28373FG000) can be used
- Bumpsteer adjustment
Bumpsteer is adjusted via washers on the upright
- OEM wheel speed sensor
Either 1992 - 2007 or 2008 - 2013 type can be used. Hardware for installing included
- CrMo spherical
Rod end used instead of OEM tie rod
- STI or WRX shocks
Adaptor to fit either STI or WRX shock included
- Pre 2003 and 2015 MY steering rack adaptors
Pre 2003 steering rack M14 inner tie rod applications need part number - WFGD3_620A (If needed please email at time of order)
2015 MY steering rack M20 inner tie rod applications need part number - WFGD3_610A (If needed please email at time of order)
- Fits with all OEM fixed 4 piston brake calipers.
Does not fit with OEM one or two piston floating brake caliper.